Tiger - Quilled Picture Landscape

Phew !!! At last my quilled landscape styled tiger  is complete.  I love quilling pictures more than floral designs. I am very new to quilling but I think this came out rather well. Specially the ferocious  look makes him look rather frightening. 
I am glad I managed to get the eyes to look natural. If you like my work please leave your comments.

Read More

Parrot - Quilled Picture Landscape

I quilled this parrot like a quilled landscape or quilled picture from an image of it. I used loose scrolls made from A4 length 3mm strips.I find it is important to get the eyes right to get a realistic look. I am quite impressed with the fact that it has a bit of depth.

I tried to arrange the quill to follow the natural curves of the bird to get the depth. I clipped the edge of the quilled marque to get the feathery effect .
For the eyes, I made a coil and allowed it to relax a wee bit before gumming it. Then I made an itsy white tight scroll and fattened it into a 1/4 moon and inserted it off center to get the highlight effect.

I made the palm by looking at one in my garden ( I live in the tropics)by pasting between 10 to 12, 1/4 A4 strips to form a 3/4 circle.  I scored lines on each leaf strand by placing it on a semi hard surface and then drawing lines with a blunt instrument. If the surface is hard the lines won't get embossed and if the surface is too soft the paper will tear.

I had made the parrot and branch on a cut-out so I was able paste the parrot on top of the palms .

On hind sight , I feel I should have stuck a few tight scrolls and mounted the parrot on top the give a nice 3D effect  to the scene.

Read More

Brose de Martisor

           Anul acesta am intrecut masura la brose. Nu e vina mea, adevarul e ca , cu cat scimbam culorile la hartie , cu atat imi doream sa mai fac. M-am gandit ca oricum nu strica daca sunt mai multe, merg foarte bine in orice ocazie. Va las mai jos minunatiile . Multumesc celor care au trecut azi pe la Palatul Sutu, la targul de handmade , iar cei care nu au reusit sa iasa din casa azi , poate reusesc maine. Adriana, partenera mea de lucru de la Handmade for Fun , va asteapta intre orele 10:00 si 18:00, cu o multime de martisoare, felicitari, bijuterii si alte cadouri  pentru doamnele si domnisoarele din viata dvs.

    ***  Am fost intrebata de tehnicile pe care le-am folosit la aceste brose. Am folosit mai multe, unele  dintre ele ,  le-am adaptat dupa cum mi-a placut mie. Dintre tehnicile pe care  le-am folosit : Beehive by Susan , video tutorial by  Prites  ;  Triplet tutorial by Syaz  , video tutorial by Pritesh ; Noodle petal flower - acesta l-am facut singura fara tutorial, nici nu stiam ca exista, insa dupa, intamplator , am gasit un tutorial facut de   Pritesh . Eu de regula lucrez dupa ideile mele insa  , cateodata le combin cu ceea ce vad pe internet.

Read More

Quilled Butterflies and Flowers

I quilled these 3d butterflies using a printout of the butterfly and followed the colors as closely as possible. Most parts of the wings are  made of loose coils except for the edge of the wings where I have used the beehive technique.

Read More

Quilled Flower and Humming Bird

I loved the piece quilled 3d flowers and humming bird Inna had created so I thought the best way to learn is to try and see how close I could get. And this is the results. Well I'm proud of this coz I had been quilling for just over a week when I did this piece. Please check out Inna's work here.

I am all thumbs and keep getting bathed in glue!! Begginers please be careful with the glue and apply very little and use a toothpick!! Your fingers get stuck to the paper quicker than the card your sticking it on!!

Another problem I had was  the length of the strip!! My flowers were all rather too big. I also had problems with the fringed flowers. Found it difficult to get the petals spread evenly and the coil kept comming loose as I had not coiled it tight!!. But I am satisfied with the end result.

I learned the hard way by getting into the deep end!! Anyway, fringed flowers come out better if you keep the coil tight and glue it now and then when rolling!! ( at least for me it does). And open the flower up in an orderly fashion without being impatient like me!! Arrange the petals evenly when opening and make sure you stick the different sized fringes so there is an even bottom.

I you paste the fringe facing down and thurn it up after quilling you will get the curled-in   look which look really cool for flower centres.

Read More

Butterfly Tree - Quilled Butterfly & Flowers

I created this piece from the various experimental flowers that I quilled. The poppy was damaged by one of my cats!!. I made the poppy from Inna's very comprehensive tutorial. Her site is my favorite and I love her work. It is a "must visit" site for all who want to learn from one of the best!!

The Monarch Butterfly is my own. I downloaded a picture of a monarch and followed it as faithfully as possible. I used loose scrolls and tight scrolls. Outlined the scrolls in black and stuck them together on top of a printout of a monarch. Did not past it to the paper since I wanted a 3D butterfly.

I made the body with a 1cm strip (A4) and shaped it to form the body. The head is made from tight scrolls. I cut the paper to narrow towards on end and quilled tight scrolls stating with the broad end. This made the sides pop out a bit like eyes.

For the top of the wings I quilled a black loose scroll, shaped it and then made three very small white tight scrolls, squashed them and stuck them inside the outermost layer. I am quite proud of this butterfly!! looks quite good for a beginner!! even though I say so myself!!

Read More

Quilled Candle Stand

My very first experiment with quilling 3d flowers was to dress up a broken clay lamp.I used printing paper cut by hand to make the quilled rose which forms the centre of the flower. I learnt to make the rose from a youtube video and for the petals I used eccentric circles which I did by hand. The leaves I made by using the the husking method.

Read More

Martisoare 3D

                         Cateva martisoare 3D desigur din hartie ( asta pentru cei ce nu stiu). Sunt dragalase, atrag privirile, starnesc curiozitate, sunt usor de purtat si pot fi daruite oricui, fara limita de varsta.
                         La un model m-am inspirat din creatiile lui Nati (porumbel), iar albinuta de la Olga ... nu mai stiu, am gasit-o pe un site rusesc , dar am pierdut adresa.Desigur nu lipsesc ghivecele cu flori micute si colorate. Sper sa va placa.

Va asteptam sambata 25 februarie si duminica 26 februarie la targul de martisor I love Handmade care va avea loc in Piata Universitatii in curtea Muzeului de Istorie, Palatul Sutu. Vremea o sa fie superba, asa ca nu stati in casa!!!

Read More

Floricele vesele !

                               Cum se apropie primavara, chiar daca inca sunt munti de zapada afara, m-am gandit  sa fac o bijuterie vesela care sa poata fi purtata atat de adolescente cat si de doamne . Desigur gusturile nu se discuta, insa sper sa fie pe placul  unora dintre dvs.
                               Aceste coliere le veti putea admira si cumpara  in data de 25-26  Martie, la targul I love Handmade de la palatul Sutu, din piata Universitatii, Bucuresti. Va asteptam!

    *** Puteti comanda aceste produse prin e-mail sau pe Handmade For Fun.

Read More